|
|
 |
|
|
Tank
Selection and Application Guidelines
This page will assist
you in selecting the proper tank for your application. Please
complete all of the steps listed and refer to the links as suggested,
then contact Sales Support to find a distributor near you.
|
|
STEP
1 |
Identify the
chemical(s) to be stored in the tanks. Be certain to obtain a Certificate
of Composition, MSDS (Material Safety Data Sheet) or other data
from the chemical supplier so that the actual chemical compounds
can be identified to properly evaluate the effect of the chemical
on polyethylene storage containers. See Materials
Information for additional material information. |
|
STEP
2
|
Review the Chemical
Resistance Data Chart. This
will determine if the chemical to be stored is compatible with polyethylene.
Be certain to consider the temperature limitations for your application.
|
|
|
STEP
3
|
Select the necessary
tank size and accessories according to your capacity needs, available
space, use/application and whether the tank is to be transported.
The Liquid Storage
and Containment category
details the available styles. Be
certain that you check the dimensional tolerances specified for
the tank you select and that the installation allows for these tolerances.
For close tolerance installations it is recommended that you measure
the actual tank to be used or that you verify dimensional values
with the factory before construction.
|
|
|
NOTE: Fittings
are installed to a standard size and location as indicated in the
product catalog and online listings. If factory fittings are
not required, this should be indicated on your order (e.g., "Send
fittings loose.") If you request fittings to be installed
that are not the standard size, that should be indicated on your
order (e.g., "Install 3 inch fittings.") If standard locations
are not acceptable or to insure proper placement of fittings, locate
the tank diagram for the tank style
to be ordered on our Accessories
Placement Diagram page. Specify each fitting location
on the diagram according to the instructions provided. It is important
to include these diagrams with your faxed order to insure that the
fittings are installed to your specifications.
|
|
| STEP 4 |
Review the
Handling, Installation and Use Guidelines |
|
| STEP 5 |
Contact
Sales Support at Den Hartog Industries, Inc.
Phone:1-800-342-3408
Fax: 712-752-8222
Email:
sales@denhartogindustries.com
|
|
|
